새로운 태양광 패널 출시

새로운 가능성의 태양광 기술이 대량생산으로 이끌 가능성을 보이고 있다. 알미늄 포일 위에 CIGS라 불리우는 세미콘닥터 재료를 프린트하여 만드는 자동화된 태양광 발전 생산 시설을 가동하기 시작하였다.

Advanced Solar Panels Coming to Market

Nanosolar's new factory could help lower the price of solar power, if the market cooperates.

By Kevin Bullis

Thursday, September 17, 2009

A promising type of solar-power technology has moved a step closer to mass production. Nanosolar, based in San Jose, CA, has opened an automated facility for manufacturing its solar panels, which are made by printing a semiconductor material called CIGS on aluminum foil. The manufacturing facility is located in Germany, where government incentives have created a large market for solar panels. Nanosolar has the potential to make 640 megawatts' worth of solar panels there every year.

Cheaper solar: Nanosolar’s thin-film panels. Credit: Nanosolar

Solar cells made of the CIGS semiconductor, which is composed of copper, indium, gallium, and selenium, have long been considered a potential challenger to conventional solar cells made of silicon. At least in the lab, CIGS cells have reached efficiencies comparable to silicon-based solar cells. And in theory, they could be made using inexpensive printing processes, leading to much less expensive solar power. But developing manufacturing processes that maintain the high efficiencies has proven difficult.

Nanosolar claims to have solved these problems. Its solar cells still aren't as efficient as laboratory cells--the best of them convert 16.4 percent of the energy in sunlight into electricity, as opposed to over 20 percent in the lab. And on average, the company's solar panels convert just 11 percent of that energy into electricity, says Martin Roscheisen, Nanosolar's CEO. But that's high enough to compete with conventional solar panels, he says, due to modifications that improve performance and lower installation costs. He estimates that in sunny locations, power plants made using these panels could produce electricity at five to six cents per kilowatt hour, based on Department of Energy methods for calculating the amortized cost of solar panels over their lifetimes. That's near the cost of electricity from coal and significantly less than most solar power, which costs about 18 to 22 cents per kilowatt hour.

Low efficiency is a problem because it increases the cost of installing solar-power arrays--since each panel produces less power, more solar panels have to be installed. The lower power production can also increase the cost of electronics for gathering the power the panels produce. To address the latter problem, Nanosolar has increased the current its panels can generate, in part by using large aluminum-foil sheets to collect electrons from each panel. This, together with other modifications, effectively decreases the amount of wiring per panel, simplifying installation and reducing the cost of materials. The panels are also larger than competing solar panels with similar efficiencies, and so they generate more power per panel. For example, solar panels from First Solar of Tempe, AZ, one of the largest solar-panel companies in the world, generate about 70 watts. Nanosolar's generate 160 watts.

Robo solar: Nanosolar’s new, fully automated solar-panel manufacturing facility near Berlin, Germany, which makes thin-film panels based on the CIGS semiconductor, could lower the price of solar power. Credit: Nanosolar

The new manufacturing plant, which assembles Nanosolar's solar cells into panels, will also help reduce costs. The plant is completely automated, using robots and other equipment, and can process solar cells more than twice as fast as conventional solar-panel factories, Roscheisen says.

Even with these improvements, however, it will be difficult for Nanosolar to compete, especially given current economic conditions. The low costs that Roscheisen cites are attainable only if the plants are operating close to capacity. And so far, actual production is very low. While the new solar-panel plant is designed to make 640 megawatts' worth of solar panels a year, its current output is only one megawatt a month. That's because Nanosolar's panels are not yet "bankable." That is, the technology hasn't been proven to the point that banks are willing to finance large projects that use the panels.

And Nanosolar has plenty of competition. Prices for solar panels have recently dropped significantly, in part because demand has dropped, creating an oversupply, and in part because manufacturing technology for conventional solar panels has improved. Roscheisen says Nanosolar can make solar panels for less than First Solar, which is known for having the lowest manufacturing costs in the industry. But Bradford isn't sure the company will be able to sell its panels at a low-enough price to undercut existing manufacturers and become bankable. "Roscheisen's theory is right," he says, "but market conditions might not allow it to come to reality."